Home Fishing No Leaky Boots

No Leaky Boots

by Kurt Hoehne

Discovering wader leaks is an inevitable part of fishing and hunting.  But, you don’t need to suffer through a day of wet socks and pants when you can fix your boots on the spot.  Assemble a patch kit of standard household items and toss it in your fishing bag or vest.  You’ll make immediate repairs that will get you back in business in an hour-if not in minutes.

Patch Kit Materials and Purpose:

  1. Small pouch or zip-lock bag for patch kit storage.
  2. Tube of Aquaseal for glue.
  3. Bottle of Cotol-240 to speed up dry time.
  4. Alcohol swabs for cleaning the area to be patched.
  5. Small bristle brush for spreading Aquaseal.
  6. Women’s nylons are great, flexible patch materials.
  7. Knife or straight-edge razor blade for cutting a patch or nylon.
  8. Rubber glove to keep fingers from sticking.
  9. Lighter for melting neoprene.
  10. Masking tape for holding a cut together.

Neoprene waders are the easiest to fix because rubber melts.

  1. Peel away the nylon fabric covering the neoprene with a knife or razor blade.
  2. Close the tear with a strip of masking tape on the inside of your boots.
  3. Brush away any debris.
  4. Carefully heat the neoprene around the cut with a lighter until it starts to melt.
  5. Spread the hot rubber with a coffee stirrer.  Lay a bead in the cut as well as around the cut.
  6. Hold and let cool.


Breathable, Canvas or Rubber Waders typically require 24-hours to fix due to the cure-time for glue. But, if you use Aquaseal, a waterproof sealer, you can mix in an accelerant called Cotol-240 that reduces the required dry-time to an hour.  Kill that time re-rigging, scouting, or eating lunch.

  1. Clean the area around the cut with an alcohol swap.
  2. Close the tear with a strip of masking tape on the inside of your boots.
  3. Cut a patch from a woman’s nylon stocking to cover the hole.
  4. Mix 1 part Cotol-240 accelerator with 3 to 4 parts Aquaseal with a coffee stirrer or brush.
  5. Spread mixture around the tear in your waders.  Extend the glue 1/3 of an  inch beyond the size of the patch.
  6. Place patch in the Cotol-240/Aquaseal mixture and lay flat.
  7. Apply a light additional coat of glue on top of the patch, and lay flat to dry.

For a quick fix, Loon Outdoors offers a Sun Set Super Patch for about $4.00.  Apply the product to the tear, expose to sun for 5-20 seconds, and go fishing.  Comes in a ¼ ounce tube and works best on small tears or punctures.  For more information on the patch:

Tom Keer is an award-winning freelance writer who lives on Cape Cod, Massachusetts. Visit him at www.tomkeer.com or at www.thekeergroup.com.

Borrowed from our friends at takemefishing.org. Original post here. -KH


You may also like

Leave a Comment